# /home/brian/hostap/wpa_supplicant/wpa_supplicant -D hostap -dw -c /etc/wpa_supplicant.conf ^M-i wlan0 Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' eapol_version=1 Priority group 0 id=0 ssid='ilinx' id=1 ssid='linksys' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 wpa_driver_hostap_set_wpa: enabled=1 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_countermeasures: enabled=0 wpa_driver_hostap_set_drop_unencrypted: enabled=1 Setting scan request: 0 sec 100000 usec Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Starting AP scan (broadcast SSID) RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b19 len=12 Received 228 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 0 0: 00:04:e2:b2:c9:52 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 selected Trying to associate with 00:04:e2:b2:c9:52 (SSID='ilinx' freq=2437 MHz) Cancelling scan request WPA: using IEEE 802.11i/D3.0 WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01= 00 00 50 f2 02 01 00 00 50 f2 02 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_drop_unencrypted: enabled=1 wpa_driver_hostap_associate Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b04 len=12 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b1a len=17 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:04:e2:b2:c9:52 Association event - clear replay counter Associated to a new BSS: BSSID=00:04:e2:b2:c9:52 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: txStart WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0) EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE Setting authentication timeout: 10 sec 0 usec RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RX EAPOL from 00:04:e2:b2:c9:52 Setting authentication timeout: 10 sec 0 usec EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=95 EAPOL-Key type=254 WPA: RX message 1 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 = f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: Renewed SNonce - hexdump(len=32): f7 84 78 e5 d6 09 20 10 a9 79 a5 f= 8 2c 61 76 8f 52 75 46 d4 2c e0 2d b0 70 31 4c fc 51 98 5e e0 WPA: PMK - hexdump(len=32): dd b0 f6 38 05 b4 63 f8 ab bd d1 8d 96 7c 8a = 88 8b 15 67 7a 6b 73 7c 0c 55 11 94 7d 96 9d d0 11 WPA: PTK - hexdump(len=64): 67 90 ce f5 66 9e 3f 02 71 7a bf f2 05 ca 51 = b3 8f c8 86 62 b3 a7 5f 48 a1 48 fa 51 ac 5d d5 dd 82 a3 b1 b9 62 87 28 b7 = fe f7 d0 36 93 7a fa 22 36 b8 a7 b2 4b 24 8f d2 af 7e 61 01 00 5c 39 12 WPA: EAPOL-Key MIC - hexdump(len=16): a3 1e 0b 8b 2d 2d b9 e6 30 43 f4 d1= 9f de fa 39 WPA: Sending EAPOL-Key 2/4 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=119 EAPOL-Key type=254 WPA: RX message 3 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Sending EAPOL-Key 4/4 WPA: Installing PTK to the driver. WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6 ke= y_len=32 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=127 EAPOL-Key type=254 WPA: RX message 1 of Group Key Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Tx bit set for GTK, but pairwise keys are used - ignore Tx bit WPA: Group Key - hexdump(len=32): 0f a9 d5 d5 a3 50 18 29 d2 23 16 c4 2a = 4b 8c f1 c5 c4 49 04 df 4f 17 e7 08 cb 40 1c 90 e9 57 2e WPA: Installing GTK to the driver (keyidx=2 tx=0). WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 ke= y_len=32 WPA: Sending EAPOL-Key 2/2 WPA: Key negotiation completed with 00:04:e2:b2:c9:52 Cancelling authentication timeout EAPOL: External notification - portValid=1 EAPOL: External notification - EAP success=1 EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state SUCCESS EAP: EAP entering state SUCCESS EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state IDLE Wireless event: cmd=0x8c00 len=20 Wireless event: cmd=0x8c00 len=20 Wireless event: cmd=0x8c00 len=20 ... Wireless event: cmd=0x8c00 len=20 Wireless event: cmd=0x8c00 len=20 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 Setting scan request: 0 sec 100000 usec EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added l2_packet_receive - recv: Network is down RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 0 bytes of scan results (0 BSSes) Scan results: 0 Selecting BSS from priority group 0 No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 228 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 0 0: 00:04:e2:b2:c9:52 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 selected Trying to associate with 00:04:e2:b2:c9:52 (SSID='ilinx' freq=2437 MHz) Cancelling scan request WPA: using IEEE 802.11i/D3.0 WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01= 00 00 50 f2 02 01 00 00 50 f2 02 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_drop_unencrypted: enabled=1 wpa_driver_hostap_associate Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b04 len=12 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b1a len=17 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:04:e2:b2:c9:52 Association event - clear replay counter Associated to a new BSS: BSSID=00:04:e2:b2:c9:52 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: txStart WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0) EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE Setting authentication timeout: 10 sec 0 usec RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RX EAPOL from 00:04:e2:b2:c9:52 Setting authentication timeout: 10 sec 0 usec EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=95 EAPOL-Key type=254 WPA: RX message 1 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 = f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: Renewed SNonce - hexdump(len=32): 98 a5 24 42 9f 4f 1c 10 c4 c5 0f f= a ea 3b ae ba b6 ac ac 51 55 68 91 13 ea aa 2b f2 8c a9 fa ab WPA: PMK - hexdump(len=32): dd b0 f6 38 05 b4 63 f8 ab bd d1 8d 96 7c 8a = 88 8b 15 67 7a 6b 73 7c 0c 55 11 94 7d 96 9d d0 11 WPA: PTK - hexdump(len=64): bd 81 e7 84 50 b3 9e 8e 0d 76 fe 2e e4 c3 a1 = f7 fd bb b4 c3 7a 63 d7 ab 08 d5 80 70 0f 14 dc bc 8c f0 14 97 99 c1 05 80 = 6c fe 6c b7 0f 71 7f d7 44 fe da 7e 15 7d 9b 4e 97 be 74 07 9f ca c6 10 WPA: EAPOL-Key MIC - hexdump(len=16): d7 55 3f 47 b2 c0 ef 61 e4 f8 5b 37= d7 fd 06 0f WPA: Sending EAPOL-Key 2/4 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=119 EAPOL-Key type=254 WPA: RX message 3 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Sending EAPOL-Key 4/4 WPA: Installing PTK to the driver. WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6 ke= y_len=32 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=127 EAPOL-Key type=254 WPA: RX message 1 of Group Key Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Tx bit set for GTK, but pairwise keys are used - ignore Tx bit WPA: Group Key - hexdump(len=32): 51 f2 24 ff 49 b6 3c 89 8f 43 2c fe 66 = 10 9a a0 31 18 4e 82 54 b4 6b 8b 76 e4 a3 91 10 f9 c6 4c WPA: Installing GTK to the driver (keyidx=2 tx=0). WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 ke= y_len=32 WPA: Sending EAPOL-Key 2/2 WPA: Key negotiation completed with 00:04:e2:b2:c9:52 Cancelling authentication timeout EAPOL: External notification - portValid=1 EAPOL: External notification - EAP success=1 EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state SUCCESS EAP: EAP entering state SUCCESS EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state IDLE Wireless event: cmd=0x8b06 len=8 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 Setting scan request: 0 sec 100000 usec EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b2a len=12 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b1a len=13 Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 228 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 0 0: 00:04:e2:b2:c9:52 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 selected Trying to associate with 00:04:e2:b2:c9:52 (SSID='ilinx' freq=2437 MHz) Cancelling scan request WPA: using IEEE 802.11i/D3.0 WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01= 00 00 50 f2 02 01 00 00 50 f2 02 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_drop_unencrypted: enabled=1 wpa_driver_hostap_associate Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b04 len=12 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b1a len=17 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:04:e2:b2:c9:52 Association event - clear replay counter Associated to a new BSS: BSSID=00:04:e2:b2:c9:52 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: txStart WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0) EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE Setting authentication timeout: 10 sec 0 usec RX EAPOL from 00:04:e2:b2:c9:52 Setting authentication timeout: 10 sec 0 usec EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=95 EAPOL-Key type=254 WPA: RX message 1 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 = f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: Renewed SNonce - hexdump(len=32): f1 bc cc 66 83 96 62 5b 79 15 ca 4= a 7e 09 c1 2f a9 c2 b6 02 73 60 0d 9b 48 a6 0a 82 a9 b7 cf f4 WPA: PMK - hexdump(len=32): dd b0 f6 38 05 b4 63 f8 ab bd d1 8d 96 7c 8a = 88 8b 15 67 7a 6b 73 7c 0c 55 11 94 7d 96 9d d0 11 WPA: PTK - hexdump(len=64): f2 ff fa ca 10 d7 6e 7c 5a 1f 31 a3 a7 f4 bf = 5a 44 f2 8a 33 5a 0f 22 42 82 34 46 ce 52 33 19 95 61 6b 11 57 e1 eb a6 12 = e4 f9 18 57 a2 98 1f 12 38 c6 f6 3a bb 25 06 f6 1b bd d9 63 69 d0 ce 22 WPA: EAPOL-Key MIC - hexdump(len=16): 5b bd b1 9f e7 5c 2c 8b 6f ee e6 8e= 5b 78 24 a4 WPA: Sending EAPOL-Key 2/4 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=119 EAPOL-Key type=254 WPA: RX message 3 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Sending EAPOL-Key 4/4 WPA: Installing PTK to the driver. WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6 ke= y_len=32 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=127 EAPOL-Key type=254 WPA: RX message 1 of Group Key Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Tx bit set for GTK, but pairwise keys are used - ignore Tx bit WPA: Group Key - hexdump(len=32): 51 f2 24 ff 49 b6 3c 89 8f 43 2c fe 66 = 10 9a a0 31 18 4e 82 54 b4 6b 8b 76 e4 a3 91 10 f9 c6 4c WPA: Installing GTK to the driver (keyidx=2 tx=0). WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 ke= y_len=32 WPA: Sending EAPOL-Key 2/2 WPA: Key negotiation completed with 00:04:e2:b2:c9:52 Cancelling authentication timeout EAPOL: External notification - portValid=1 EAPOL: External notification - EAP success=1 EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state SUCCESS EAP: EAP entering state SUCCESS EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state IDLE RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Signal 2 received - terminating wpa_driver_hostap_deauthenticate wpa_driver_hostap_reset: type=2 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 wpa_driver_hostap_set_wpa: enabled=0 wpa_driver_hostap_set_drop_unencrypted: enabled=0 wpa_driver_hostap_set_countermeasures: enabled=0 # /home/brian/hostap/wpa_supplicant/wpa_supplicant -D Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' eapol_version=1 Priority group 0 id=0 ssid='ilinx' id=1 ssid='linksys' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 wpa_driver_hostap_set_wpa: enabled=1 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_countermeasures: enabled=0 wpa_driver_hostap_set_drop_unencrypted: enabled=1 Setting scan request: 0 sec 100000 usec Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=12 Received 228 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 0 0: 00:04:e2:b2:c9:52 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 selected Trying to associate with 00:04:e2:b2:c9:52 (SSID='ilinx' freq=2437 MHz) Cancelling scan request WPA: using IEEE 802.11i/D3.0 WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01= 00 00 50 f2 02 01 00 00 50 f2 02 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_drop_unencrypted: enabled=1 wpa_driver_hostap_associate Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b04 len=12 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Disconnect event - remove keys wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 Wireless event: cmd=0x8b1a len=17 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:04:e2:b2:c9:52 Association event - clear replay counter Associated to a new BSS: BSSID=00:04:e2:b2:c9:52 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: txStart WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0) EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE Setting authentication timeout: 10 sec 0 usec RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RX EAPOL from 00:04:e2:b2:c9:52 Setting authentication timeout: 10 sec 0 usec EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=95 EAPOL-Key type=254 WPA: RX message 1 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 = f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: Renewed SNonce - hexdump(len=32): cd dd ed 6f fb 55 4a dd f6 bf aa 3= d 7d 39 43 46 44 91 4c 50 89 f7 13 68 bd f8 8d 66 55 a4 c0 87 WPA: PMK - hexdump(len=32): dd b0 f6 38 05 b4 63 f8 ab bd d1 8d 96 7c 8a = 88 8b 15 67 7a 6b 73 7c 0c 55 11 94 7d 96 9d d0 11 WPA: PTK - hexdump(len=64): 2a dc 76 93 fa 7c f6 1e 73 c4 c2 e5 cc 3b c0 = b2 6b 7e 08 d5 42 14 56 bb 1d 79 6f b5 35 47 f8 6a 4a 6c 35 4d a6 d4 05 21 = 50 2f 91 74 d1 b1 5a fe 4c 4e bc 4b 79 31 dc c9 03 bd 28 e3 2b 6e 9f 5d WPA: EAPOL-Key MIC - hexdump(len=16): 12 d1 ef 61 a1 7e 1e 6e 63 ea d4 96= 00 24 5d 05 WPA: Sending EAPOL-Key 2/4 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=119 EAPOL-Key type=254 WPA: RX message 3 of 4-Way Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Sending EAPOL-Key 4/4 WPA: Installing PTK to the driver. WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6 ke= y_len=32 RX EAPOL from 00:04:e2:b2:c9:52 EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines IEEE 802.1X RX: version=1 type=3 length=127 EAPOL-Key type=254 WPA: RX message 1 of Group Key Handshake from 00:04:e2:b2:c9:52 (ver=1) WPA: Tx bit set for GTK, but pairwise keys are used - ignore Tx bit WPA: Group Key - hexdump(len=32): 51 f2 24 ff 49 b6 3c 89 8f 43 2c fe 66 = 10 9a a0 31 18 4e 82 54 b4 6b 8b 76 e4 a3 91 10 f9 c6 4c WPA: Installing GTK to the driver (keyidx=2 tx=0). WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 wpa_driver_hostap_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 ke= y_len=32 WPA: Sending EAPOL-Key 2/2 WPA: Key negotiation completed with 00:04:e2:b2:c9:52 Cancelling authentication timeout EAPOL: External notification - portValid=1 EAPOL: External notification - EAP success=1 EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state SUCCESS EAP: EAP entering state SUCCESS EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state IDLE Wireless event: cmd=0x8c00 len=20 Signal 2 received - terminating wpa_driver_hostap_deauthenticate wpa_driver_hostap_reset: type=2 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 ke= y_len=0 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 ke= y_len=0 EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 wpa_driver_hostap_set_wpa: enabled=0 wpa_driver_hostap_set_drop_unencrypted: enabled=0 wpa_driver_hostap_set_countermeasures: enabled=0